Automotive battery case mould
The Automotive battery mould mainly includes battery container mould, car battery cover mould, battery container mold, etc. The following is the detailed content shared by moldex3D as a case study.
T-Zero Mass Production success as the mold is manufactured based on the opposite warp model exported from Moldex3D.
Part Spec
The deformation of long-side ends must be less than 0.3 mm.
Challenge：
·PP as the material, and part size of 257 x 171 x 189 mm.
·6 slots are designed, in addition, shrinkage happens frequently for the outermost slots.
Solution
In view of the characteristics of the product, we adopted a production plan for pre-deformation of the mold.
We used mold flow analysis (with water channels) to simulate the deformation, then collected the deformation values, and finally modified the product design.
At the same time, the mold flow analysis verification was performed using the modified product drawing.
Finally, the confirmed result was that the mold was opened and manufactured based on the modified product drawing.
Results
Mass production was achieved at the very mold trial stage. At the same time,customer placed the follow-up order.
Tianjin Xuansheng Technology Co., Ltd. is your high-quality and experienced product partner.
We can customize and produce battery container mold ,Battery case mould, car battery cover mould, etc. for you. Of course, we also provide one-stop service for the entire process from product development, mold customization to product injection molding production.
Article from website: www.xuansheng-mold.com.
Hot News
